CW-10P _Bể gia nhiệt tuần hoàn có chương trình, 10 lít Model: CW-10P

CW-10P _Bể gia nhiệt tuần hoàn có chương trình, 10 lít

Model: CW-10P

Code: AAH52305PK

Hãng sản xuất: JEIOTECH – Hàn Quốc

Xuất xứ: Hàn Quốc

Tham khảo tại: http://www.jeiotech.com/eng/front/product/productView.php?cat_seq_i=17&pro_seq_i=202

1.      Tính năng kỹ thuật:

Bộ điều khiển chương trình hóa thông minh:

-          10 programs available for temperature ramp up and dwell control.

-          10 steps per a program and 99 hours 59 minutes per a step.

-          Stored programs are easily linkable.

-          Programs can be repeated up to 99 cycles.

-          Pre-heating and heating time are settable before program starts.

-          Microprocessor PID control / automatic tuning / auto run.

Tính năng vận hành:

-          +5℃ above room temperature to 150℃.

-          Three point temperature calibration.

-          Digital timer for delayed ON / OFF. (from 1 min to 99 hr 59 min)

-          Protection against over-temperature and low fluid level.

-          Digital input and output control function for interlocking external devices.

-          Colorful LCD display with interactive input system.

-          Keypad lock function prevents accidental changes during operation.

-          Splash-proof keypad.

-          RS-232 interface.(RS-232 to USB serial converter is provided.)

Cấu trúc:

-          Accurate, stable, and efficient temperature management by using a powerful variable-speed pump. (1 to 3 steps of the pump for internal circulation and 4 and 5 steps for external circulation)

-          Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.

-          Protection against low fluid level and dry running by auto-matic shut down of the heater together with audible and visual alarms.

-          Corrosion-resistant, seamless, leak-proof, round-cornered, and easy-to-clean stainless steel reservoir with a drain valve.

-          Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the whole temperature range.

-          Quick-release front grille for easy cleaning of the condenser.

-          Compact footprints ideal for cramped lab space.

2.      Thông số kỹ thuật:

Model		CW-05P	CW-10P	CW-20P	CW-30P
Bath Volume (L / cu ft)		5 / 0.2	10 / 0.4	20 / 0.7	30 / 1.1
Working Temperature Range 2) (℃ / ℉)		Amb. +5 to 150 / Amb. +9 to 302
Temperature Stability 1) (±℃ / ℉)		0.05 / 0.09	0.05 / 0.09	0.1 / 0.18	0.1 / 0.18
Pump	Max. Pressure, Max. Flow Rate	5.9 PSI (406.8 millibar), 7.4 gallons / minute (28 liters / minute)
	Max. Suction Flow Rate	2.6 gallons / minute (10 liters / minute)
Dimension	Bath Opening / Depth (W×L, D) (mm / inch)	150×99, 160 / 5.9×3.9, 6.3	211×154, 180 / 8.3×6.1, 7.1	290×214, 200 / 11.4×8.4, 7.9	300×264, 230 / 11.8×10.4, 9
	Overall (W×L×H) (mm / inch)	220×395×424 / 8.7×15.6×16.7	281×450×444 / 11.1×17.7×17.5	360×510×464 / 14.2×20.1×18.3	370×560×494 / 14.6×22×19.4
	Net Weight (kg / lbs)	12.5 / 27.6	15 / 33	17.5 / 38.6	19.5 / 43
Requirements (230V, 50 / 60 Hz)		4.5A	6.7A	8.8A	8.8A
Cat. No.		AAH52305PK	AAH52315PK	AAH52325PK	AAH52335PK

1) Technical data according to DIN 12876.
2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from
Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
*Bath fluid : water

3.      Cung cấp bao gồm:

-          Bể gia nhiệt tuần hoàn có chương trình 10 lít; Model: CW-10P; Code: AAH52315PK

-          Phụ kiện tiêu chuẩn

-          Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt