FLUKE – Đồng hồ điện vạn năng kỹ thuật số cho công nghiệp Fluke 80 Series V Model: Fluke 80 Series V

FLUKE – Đồng hồ điện vạn năng kỹ thuật số cho công nghiệp Fluke 80 Series V

Model: Fluke 80 Series V

Hãng sản xuất: FLUKE – MỸ

                             

Tham khảo: http://www.fluke.com/fluke/vnen/digital-multimeters/Fluke-80-Series-V-87V-83V-87V-E2-Kit.htm?PID=56135

Đồng hồ điện vạn năng kỹ thuật số Fluke 80 Series bao gồm các models sau:

• Model: Fluke 83 V Industrial DMM
• Model: Fluke 87 V True RMS Industrial DMM
• Model: Fluke 87V EX intrinsically safe DMM
• Model: Fluke 87 V/E2 Industrial Electricians Combo Kit
• Data logging DMM available
• IP67 Waterproof and dustproof DMM available

Tính năng Đồng hồ điện vạn năng kỹ thuật số cho công nghiệp Fluke 80 Series V:

New features for maximum productivity

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V) Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V) Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks Large digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models

Feature	83V	87V
True-rms ac voltage and current for accurate measurements on non linear signals		•
Selectable filter for accurate voltage and frequency measurements on motor drives		•
0.05 % dc accuracy		•
6000 counts, 3-3/4 digits	•	•
4-1/2 digit mode for precise measurements (20,000 counts)		•
Measure up to 1000 V ac and dc	•	•
Measure up to 10 A, 20 A for up to 30 seconds	•	•
Built in thermometer lets you carry one less tool (TC probe included)		•
Frequency to 200 kHz and % duty cycle	•	•
Resistance, continuity and diode test	•	•
10,000 µF capacitance range for components and motor caps	•	•
Min/Max-Average recording with Min/Max Alert to capture variations automatically	•	•
Peak capture to record transients as fast as 250 µs	•	•
Relative mode to remove test lead interference from low ohms measurements	•	•
Auto and manual ranging for maximum flexibility	•	•
Touch Hold to capture stable readings avoiding noisy signals	•	•
Large display digits and two-level bright white backlight for increased visibility	•	•
Analog bargraph for fast changing or unstable signals	•	•
Input Alert provides audible warning against wrong use of input jacks	•	•
Improved selectable sleep mode for long battery life	•	•
Access door for fast battery changes without breaking the calibration seal	•	•
"Classic" design with new removable holster with built in test lead and probe storage	•	•
Lifetime warranty	•	•

Electrical safety
All inputs are protected to the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

Correctly measure pulse-width modulated motor drive signals
Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the new Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency Measure AC current with an optional current clamp accessory Compare reading from the 87V with the display on the ASD Special shielding blocks high frequency, high-energy noise generated by large drive systems

Thông số kỹ thuật Đồng hồ điện vạn năng kỹ thuật số cho công nghiệp Fluke 80 Series V:

Specifications
Voltage DC	Maximum Voltage:  1000V Accuracy:  Fluke 83 V: ±(0.1%+1)  Fluke 87 V: ±(0.05%+1) Maximum Resolution:  Fluke 83 V: 100 µV  Fluke 87 V: 10 µV
Voltage AC	Maximum Voltage:  1000V Accuracy:  Fluke 83 V: ±(0.5%+2)  Fluke 87 V: ±(0.7%+2) True RMS AC Bandwidth  Fluke 83 V: 5kHz  Fluke 87 V: 20kHz*  *with low pass filter; 3db @ 1kHz Maximum Resolution:  0.1 mV
Current DC	Maximum Amps:  10A (20 A for 30 seconds maximum) Amps Accuracy:  Fluke 83 V: ±(0.4%+2)  Fluke 87 V: ±(0.2%+2) Maximum Resolution:  Fluke 83 V: 0.01 mA  Fluke 87 V: 0.01 µA
Current AC	Maximum Amps:  10A (20 A for 30 seconds maximum) Amps Accuracy:  Fluke 83 V: ±(1.2%+2)  Fluke 87 V: ±(1.0%+2) True RMS Maximum Resolution:  0.1 µA
Resistance	Maximum Resistance:  50 MΩ Accuracy:  Fluke 83 V: ±(0.4%+1)  Fluke 87 V: ±(0.2%+1) Maximum Resolution:  0.1Ω
Capacitance	Maximum Capacitance  9,999 µF Accuracy  ±(1%+2) Maximum Resolution  0.01 nF
Frequency	Maximum Frequency  200 kHz Accuracy  ±(0.005%+1) Maximum Resolution  0.01 Hz
Duty Cycle	Maximum Duty Cycle  99.9% Accuracy  ±(0.2% per khz +0.1%) Maximum Resolution  0.1%
Temperature Measurement	Fluke 87 V, 87 V/E:  -200.0°C - 1090°C  -328.0°F - 1994.0°F  excluding probe
80 BK Temperature Probe	-40.0°C - 260°C  -40.0°F - 500°F, 2.2°C or 2% whichever is greater
Conductance	Maximum Conductance  60.00 nS Accuracy  ±(1.0%+10) Maximum Resolution  0.01 nS
Diode	Range:  3 V Resolution:  1 mV Accuracy:  ± (2 % + 1)
Duty Cycle Range	Accuracy:  Within ± (0.2% per kHz + 0.1 %)

Environmental Specifications
Operating Temperature	-20°C to +55°C
Storage Temperature	-40°C to +60°C
Humidity (Without Condensation)	0% - 90% (0°C - 35°C)  0% - 70% (35°C - 55°C)
Operating Altitude	2000 m

Safety Specifications
Overvoltage category	EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals	UL, CSA, TÜV, VDE listed

Mechanical & General Specifications
Size	201 x 98 x 52 mm (with holster)
Weight	355 g
Weigh With Holster and Flex-Stand	624 g
Display	Digital:  6000 counts updates 4/sec.  (Model 87 also has 19,999 counts in high-resolution mode.) Analog:  32 segments, updates 40/sec. Frequency:  19,999 counts, updates 3/sec at > 10 Hz.
Warranty	Lifetime
Battery Life	Alkaline:  ~400 hours typical, without backlight
Shock	1 Meter drop per IEC 61010-1:2001
Vibration	Per MIL-PRF-28800 for a Class 2 instrument