Máy đo nhớt không rotor Model: HZ-7001A

Máy đo nhớt không rotor

Model: HZ-7001A

-          HZ-7001-type non-rotor rheometer is a widely used tester in rubber processing industry, rubber quality control and basic research rubber, For optimize formula of rubber provide accurate data, It can accurately measure the scorch time, rheometer time, sulfide index, the maximum and minimum torque and other parameters.

Features:

-          This instrument is really confined mold cavity, and the United States Alpha (formerly Monsanto) has done. Repeatability, and test data comparable with the Alpha. At the international leading position in the same industry.

The instrument development platform based on large databases, temperature control devices using the software to directly control and collection and processing. Instrument to overcome the general curing temperature of the shortcomings of using temperature controller (accuracy poor). The technical leadership of international new trend.

-          This instrument has statistics, analysis, storage and comparison functions. Humanized design, easy to operate

-          Using imported high-precision sensors

Corresponding standard:

-          Accord with GB/T16584 (rubber- no rotor rheometer to measure the characteristics of vulcanized) ISO6502:1991 and ASTMD5289-95

Technical parameter:

-          Standard: GB/T16584 IS06502

-          Temperature: room temperature to 200 Centigrade

-          Heating-up:15 Centigrade/min

-          temperature fluctuation: ≤ ±0.3 Centigrade

-          temperature resolution : 0.1 Centigrade

-          torque range: 0-5N.M、0-10N.M、0-20N.M

-          torque resolution: 0.001NM

-          Power: 50HZ, ～220V±10%

-          Pressure: 0.4Mpa

-          Air-pressure requirment:0.5Mpa--0.65MPa (user prepare the dia 8trachea)

-          Environment temperature :10 Centigrade--20 Centigrade

-          Humidity range:55--75%RH

-          Compressed air: 0.35-0.40Mpa

-          Swing frequency : 100r/min(about 1.67HZ)

-          Swing angle:±0.5 Centigrade ，±1 Centigrade ，±3 Centigrade

Printing: date, time, temperature, vulcanization curve, temperature curve, ML, MH, ts1, ts2, t10, t50, Vc1, Vc2.