Bơm lấy mẫy khí: 10 – 30 LPM Model: QuickTake 30

Bơm lấy mẫy khí: 10 – 30 LPM

Model: QuickTake 30

Háng sản xuất: SKC – Mỹ

                                      

Tham khảo: http://www.skcinc.com/catalog/index.php?cPath=100000000_102000000_102000300

Flow Range	10 to 30 L/min
Flow Compensation Accuracy	± 5% of set flow
Compensating Flow Back Pressure Range	10 L/min at 90 inches water back pressure 20 L/min at 50 inches water back pressure 30 L/min at 15 inches water back pressure
Typical Back Pressure of Sampling Media (inches water) Flow Rate 10.0 12.0 15.0 20.0 Filter/Pore Size (µm) 25-mm MCE/0.8 65 80 103 148 25-mm MCE/0.45 138 172 > 200 — 37-mm MCE/0.8 22 28 36 51 37-mm PVC/5.0 9 11 15 21 Compare the information in this table to compensation range to determine appropriate applications.
Power	Rechargeable lithium-ion (Li-Ion) battery, 7.4-volt, 9.6-Ah capacity, 71.04 Wh, or battery with AC charger/adapter (100-240 V)
Battery Recharge Time (varies with battery capacity and level of discharge)	Approximately 5 hrs with approved charger
Typical Cumulative Run Time‡	Spore Trap cassettes (VersaTrap): 5 hrs at 15 L/min (battery only) BioStage viable cascade impactor: 4 hrs at 28.3 L/min (battery only) 25-mm, 1.2-µm MCE filter: 9+ hrs at 10 L/min To achieve, use QuickTake 30 with a fully charged battery and AC charger/adapter. 37-mm, 0.8-µm MCE filter: 14+ hrs at 10 L/min (battery only) Note: The AC charger/adapter can be used to extend battery run time, but it is not a battery eliminator. Therefore, it will not provide indefinite run times.
Temperature	Operating: 32 to 113 F (0 to 45 C) Storage: -4 to 95 F (-20 to 35 C)  Charging: 32 to 113 F (0 to 45 C)
Operating Humidity	0 to 95% non-condensing
Run Time Features	User-selectable features, user-adjustable presets. See Operating Instructions. Preset timed runs: 1, 2, 5, 10, or 15 min Manually set continuous run with manual shut-off: 1 to 999 min (repeats 1 to 999-min runs indefinitely until user stops pump or power supply is depleted) Intermittent sampling: User-set sample periods and sample delays. See Operating Instructions.
Flow Fault Features	If the pump is unable to compensate due to excessive back pressure, the pump will go into flow fault mode. Flow fault features are enabled as the default setting. Flow fault may be disabled at the user’s option. See Operating Instructions. Flow fault: Flow fault displays immediately. Pump shuts off after 5 seconds. Fault restart: Pump attempts restart every 10 seconds up to five times.
Media Compatibility	BioStage viable cascade impactors, spore trap cassettes, microvacuum cassettes, and other samplers that require flows to 30 L/min
Tubing	Requires 3/8-inch ID tubing
Housing	ABS plastic
Dimensions	9.3 x 8.4 x 3.5 in (23.6 x 21.3 x 8.9 cm)
Weight	4.8 lbs (2.2 kg)