FLUKE – Bộ KIT đo khoảng cách bằng Lazer và Đo nhiệt hồng ngoại Fluke 414D/62 MAX + Model: Fluke 414D/62 MAX +

FLUKE – Bộ KIT đo khoảng cách bằng Lazer và Đo nhiệt hồng ngoại Fluke 414D/62 MAX +

Model: Fluke 414D/62 MAX +

Hãng sản xuất: FLUKE – MỸ

Tham khảo: http://www.fluke.com/fluke/vnen/laser-distance-meters/fluke-414d-62-max-plus-kit.htm?PID=75996

                               

Tính năng Bộ KIT đo khoảng cách bằng Lazer và Đo nhiệt hồng ngoại Fluke 414D/62 MAX +:

The 414D reduces errors, saves time and money.

• The most advanced laser technology for distance measurement.
• Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in).
• Quick calculation of area (square feet/meters) and volume.
• Pythagoras function indirectly measures height via two other measurements.
• Stores up to five measurement results.
• Battery life of 3000 measurements with automatic shut-off feature.

Fluke 62 MAX+. Small in size. Big on toughness.

• Dust and water-resistant: IP54 rated.
• Rugged: 3-meter (9.8-foot) drop tested.
• Ergonomically designed: Completely redesigned for a more natural hand fit.
• Distance to spot: 12:1.
• Dual lasers: Identifies area to be measured.
• Large, backlit display: Makes data easier to read, even in dark areas.

Thông số kỹ thuật Bộ KIT đo khoảng cách bằng Lazer và Đo nhiệt hồng ngoại Fluke 414D/62 MAX +:

Distance Measurement
Typical Measuring Tolerance[1]		± 2.0 mm [3]
Maximum Measuring Tolerance[2]		± 3.0 mm [3]
Range at Leica target plate GZM26		50 m / 165 ft
Typical Range[1]		40 m / 130 ft
Range at unfavorable condition[4]		35 m / 115 ft
Smallest unit displayed		1 mm / 1/16 in
∅ laser point at distances		6 /30 / 60 mm  (10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam[5]	No
Measuring tolerance to housing[5]	No
Range	No
General
Laser class	2
Laser type	635 nm, <1 mW
Protection class	IP40
Automatic laser off	After 90 seconds
Automatic power off	after 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03	Up to 3,000  measurements
Size (H X W X L)	116mm Length 53mm Width  33mm Depth
Weight (with batteries)	113 g
Temperature range: Storage Operation	-25 °C to +70°C (-13 °F to +158 °F)  0 °C to +40 °C  (32 °F to +104 °F)
Calibration cycle	Not applicable
Maximum altitude	3000 m
Maximum relative humidity	85% at 20 °F to 120°F  (-7 °C to 50 °C)
Safety	IEC Standard No. 61010-1:2001  EN60825-1:2007 (Class II)
EMC	EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010
[1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C.  [2] Applies for 10 to 500 % target reflectivity, high background illumination, -10 °C to +50 °C. [3] Tolerances apply from 0.05 m to 10 m with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. [4] Applies for 100 % target reflectivity, background illumination between 10'000 lux and 30'000 lux. [5] After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature Range	-30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy	±1.0 °C or ±1.0% of reading, whichever is greater -10 °C to 0 °C: ±2.0 -30 °C to -10 °C: ±3.0
Response Time (95%)	Fluke 62 MAX+	<300 ms (95% of reading)
	Spectral Response	8 to 14 microns
	Emissivity	0.10 to 1.00
Optical Resolution	12:1 (calculated at 90% energy)
Display Resolution	0.1 °C (0.2 °F)
Repeatability of Readings	±0.5% of reading or <±0.5 °C (1 °F), whichever is greater
Power	AA battery
Battery Life	8 hours with laser and backlight on
Physical Specifications	Weight	255 g (8.99 oz)
	Size	(175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
	Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
	Storage Temperature	-20 °C to 60 °C (-4 °F to 140 °F), (without battery)
	Operating Humidity	10 % to 90 % RH non-condensing at 30 °C (86 °F)
	Operating Altitude	2000 meters above mean sea level
	Storage Altitude	12,000 meters above mean sea level
	IP Rating	IP 54 per IEC 60529
	Drop Test	3 meters
	Vibration and Shock	IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
	EMC	EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval	Compliance	EN/IEC 61010-1: 2001
	Laser Safety	FDA and EN 60825-1 Class II