FLUKE – Máy đo khoảng cách bằng Lazer Fluke 424D Model: Fluke 424D

FLUKE – Máy đo khoảng cách bằng Lazer Fluke 424D

Model: Fluke 424D

Hãng sản xuất: FLUKE – MỸ

Tham khảo: http://www.fluke.com/fluke/vnen/Laser-Distance-Meters/Fluke-424D.htm?PID=74290

                                

Tính năng Máy đo khoảng cách bằng Lazer Fluke 424D:

The feature-packed 424D distance meters measures up to any situation. 

Measures up to 100 m (330 ft) Higher accuracy: +/-1 mm (0.04 in) 4-line display shows you even more data at a glance Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle Corner angle feature, allows you to determine the angle of a corner Compass provides a "heading" for your distance measurements Stores 20 complete displays for quick recall Backlight Tripod mode allows you to mount the meter to a tripod when measuring long distances Full Pythagoras function for height measurements Audible keypad feedback Stake Out feature helps you mark out defined lengths such as when constructing wooden frames Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point Minimum/Maximum function Enhanced environmental protection:IP54-rated as dust and water spray resistant Improved battery life of 5000 measurements with auto shut-off feature Like all the new Fluke Laser Distance Meters, the 424D offers instant, one-button measurements of the distance between two objects with: Easy targeting with bright laser Quick calculations of area (square feet/meters) and volume Easy-to-use addition and subtraction function

All meters offer: 

Reduction of estimation errors, saving both time and money The most advanced 2 laser technology for distance measurement Instant measurement with one-button operation Easy addition and subtraction function Quick calculation of area (square footage) and volume Easy addition and subtraction of measurements Minimum/maximum function Improved battery life from automatic shut-off feature Pythagoras calculation for determining distance indirectly from two other measurements Pouch with Fluke logo Three-year warranty

The 424D and 419D additionally offers: 

Improved visibility with backlit screen Ability to measure up to 80 m (260 ft) for 419D, 100 m (330 ft) for 424D Tripod mode allows you to mount to a tripod for measuring long distances Stake out function Enhanced Pythagoras calculation for determining distance indirectly from three other measurements Audible keypad feedback Storage of the last twenty measurements for quick recall of distance Strong environmental protection with IP54 (water spray and dust proof) sealing

The 424D additionally offers: 

Inclination sensor for taking measurements in hard to reach areas Compass provides a "heading" for distance measurement Automated end-piece correction: when measuring from an edge or corner, a built-in sensor detects the position of this bracket and automatically changes the reference point Thông số kỹ thuật Máy đo khoảng cách bằng Lazer Fluke 424D: Model 414D 419D 424D Distance Measurement Typical Measuring Tolerance[1] ± 2.0 mm [3] ± 1.0 mm [3] Maximum Measuring Tolerance[2] ± 3.0 mm [3] ± 2.0 mm [3] Range at Leica target plate GZM26 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft Typical Range[1] 40 m / 130 ft 80 m  / 260 ft 80 m / 260 ft Range at unfavorable condition[4] 35 m / 115 ft 60 m / 195 ft 60 m / 195 ft Smallest unit displayed 1 mm / 1/16 in 6 /30 / 60 mm  (10 / 50 / 100 m) ∅ laser point at distances 6 /30 / 60 mm  (10 / 50 / 100 m) 6 /30 / 60 mm  (10 / 50 / 100 m) Tilt measurement Measuring tolerance to laser beam[5] No No ± 0.2° Measuring tolerance to housing[5] No No ± 0.2° Range No No 360° General Laser class 2 Laser type 635 nm, <1 mW Protection class IP40 IP54 Automatic laser off After 90 seconds Automatic power off after 180 seconds Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000  measurements Up to 5,000  measurements Size (H X W X L) 116mm Length 53mm Width  33mm Depth 127mm Length  56mm Width 33mm Depth 127mm Length  56mm Width  33mm Depth Weight (with batteries) 113 g 153 g 158 g Temperature range: Storage Operation -25 °C to +70°C (-13 °F to +158 °F)  0 °C to +40 °C  (32 °F to +104 °F) -25 °C to +70°C  (-13 °F to +158 °F)  -10 °C to +50 °C  (14 °F to +122 °F) Calibration cycle Not applicable Not applicable Tilt and compass Maximum altitude 3000 m 3000 m 3000 m Maximum relative humidity 85% at 20 °F to 120°F  (-7 °C to 50 °C) 85% at 20 °F to 120°F  (-7 °C to 50 °C) 85% at 20 °F to 120°F  (-7 °C to 50 °C) Safety IEC Standard No. 61010-1:2001  EN60825-1:2007 (Class II) EMC EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010 [1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C.  [2] Applies for 10 to 500 % target reflectivity, high background illumination, -10 °C to +50 °C. [3] Tolerances apply from 0.05 m to 10 m with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. [4] Applies for 100 % target reflectivity, background illumination between 10'000 lux and 30'000 lux. [5] After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.