FLUKE – Máy hiện sóng Fluke 120 Series Model: Fluke 120 Series

FLUKE – Máy hiện sóng Fluke 120 Series

Model: Fluke 120 Series

Hãng sản xuất: FLUKE – MỸ

Tham khảo: http://www.fluke.com/fluke/vnen/Portable-Oscilloscopes/Fluke-120.htm?PID=55999

                             

Tính năng Máy hiện sóng Fluke 120 Series:

ScopeMeter® 120 Series : As simple as one-two-three

Dual-input 40 MHz or 20 MHz digital oscilloscope Two 5,000 counts true-RMS digital multimeters Automatic measurements A dual-input TrendPlot™ recorder Connect-and-View™ trigger simplicity for hands-off operation Shielded test leads for oscilloscope, voltage, resistance and continuity measurements 10:1 Voltage Probe included with Fluke 124 and 125 for high frequency measurements Up to 7 hours battery operation 600 V CAT III safety certified Optically-isolated interface for PC connection Rugged, compact case Fluke 125 gives bus health and power measurements Thông số kỹ thuật Máy hiện sóng Fluke 120 Series: Specifications Oscilloscope Bandwidth Fluke 125:  40 MHz Fluke 124:  40 MHz Fluke 123:  20 MHz Dual input True RMS Meter  Vdc, Vac, Vac+Vdc, Ohms,Continuity , Diode-test  Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset TrendPlot Recording  Automatic vertical scaling and time compression.  Display the actual, MIN, MAX and AVG reading. Cursors Fluke 125/124:  ∆T, 1/∆T, V, ∆V, rise- and fall time Real-time sample rate  25 MS/s Equivalent sampling rate  up to 2.5 GS/s (125, 124) or 1.25 GS/s (123). Inputs and digitizers   2 Timebase range Fluke 125/124:  20 ns - 1 min/div Fluke 123:  10 ns - 1 min/div Input sensitivity  5 mV - 500 V/div Trigger types  Connect-and-View™, Free Run, Single Shot, Edge, Video, External Glitch capture  40 ns Scope measurements  Automatic measurements: 26 (all instruments) On top, Fluke 125 has additional measurement functions for Power (W), VA, VAR and Power Factor (PF) for single phase and balanced-three-phase (delta) power systems. Harmonics mode  Fluke 125 has capbility to analyze the harmonics contents of power signals. See below for details. Maximum record length  512 min/max pts per input Memory Fluke 125/124:  20 screens and setups Fluke 123:  10 screens and setups Additional Power measurement capabilities (Fluke 125 only) Measurement types: •  Watt, •  VA, •  VAR, •  Power Factor (PF) Power configuration:  Single phase or balanced three-phase (delta-configuration) mains supply Voltage measurement  Channel A; using STL120, voltage probe or direct input Current measurement  Channel B, using i400s (included) or other compatible current clamp Current Clamp or Shunt sensitivity:  0.1 / 1 / 10 / 100 / 1000 mV/A, 10 mV/mA and 400 mV/A. Harmonics Mode (Fluke 125 only)  Converts waveform information into a harmonics display (using FFT processing) which shows the relative amplitudes of the 1st up to the 33rd harmonic Analyzed waveform:  Voltage waveform(Ch.A), Current wavefrom (Ch.B) or Power (Ch.A x Ch.B), automatically generated. Harmonics Frequency range:  DC up to 33rd harmonic (for fundamental up to 60 Hz);  DC up to 24th harmonic (for fundamental up to 400 Hz). Display  Bargraph showing 1st up to 33rd harmonic and DC; amplitude displayed in % relative to fundamental Measurements:  Relative amplitude of individual harmonics;  THD in %r or %f. Environmental Specifications Operating Temperature  0 ºC to 50 ºC Storage Temperature  -20 °C to +60 °C Operating Altitude  3,000 m Safety Specifications Electrical Safety  600V CAT III (EN61010-1) Mechanical & General Specifications Size  232 x 115 x 50 mm Weight  1.2 kg Warranty  3-years on main instrument, 1-year on accessories Battery Life  7 hrs using NiMH RS232/USB Interface  Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC