FLUKE – Máy đo khoảng cách bằng Lazer Fluke 414D Model: Fluke 414D

FLUKE – Máy đo khoảng cách bằng Lazer Fluke 414D

Model: Fluke 414D

Hãng sản xuất: FLUKE – MỸ

Tham khảo: http://www.fluke.com/fluke/vnen/Laser-Distance-Meters/Fluke-414D.htm?PID=74281

                           

Tính năng Máy đo khoảng cách bằng Lazer Fluke 414D:

The 414D reduces errors, saves time, saves money. 
Features:

The most advanced laser technology for distance measurement Simple one-button operation to instantly measure distance between two objects Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in) Bright laser for easy targeting even at longer distances Quick calculation of area (square feet/meters) and volume Easy addition and subtraction function Pythagoras function indirectly measures height via two other measurements Stores up to five measurement results Battery life of 3000 measurements with automatic shut-off feature Two-line display with display hold (until next button is pressed) Carrying pouch secures to your tool belt Powered by two AAA batteries

All meters offer: 

Reduction of estimation errors, saving both time and money The most advanced 2 laser technology for distance measurement Instant measurement with one-button operation Easy addition and subtraction function Quick calculation of area (square footage) and volume Easy addition and subtraction of measurements Minimum/maximum function Improved battery life from automatic shut-off feature Pythagoras calculation for determining distance indirectly from two other measurements Pouch with Fluke logo Three-year warranty Thông số kỹ thuật Máy đo khoảng cách bằng Lazer Fluke 414D: Model 414D 419D 424D Distance Measurement Typical Measuring Tolerance[1] ± 2.0 mm [3] ± 1.0 mm [3] Maximum Measuring Tolerance[2] ± 3.0 mm [3] ± 2.0 mm [3] Range at Leica target plate GZM26 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft Typical Range[1] 40 m / 130 ft 80 m  / 260 ft 80 m / 260 ft Range at unfavorable condition[4] 35 m / 115 ft 60 m / 195 ft 60 m / 195 ft Smallest unit displayed 1 mm / 1/16 in 6 /30 / 60 mm  (10 / 50 / 100 m) ∅ laser point at distances 6 /30 / 60 mm  (10 / 50 / 100 m) 6 /30 / 60 mm  (10 / 50 / 100 m) Tilt measurement Measuring tolerance to laser beam[5] No No ± 0.2° Measuring tolerance to housing[5] No No ± 0.2° Range No No 360° General Laser class 2 Laser type 635 nm, <1 mW Protection class IP40 IP54 Automatic laser off After 90 seconds Automatic power off after 180 seconds Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000  measurements Up to 5,000  measurements Size (H X W X L) 116mm Length 53mm Width  33mm Depth 127mm Length  56mm Width 33mm Depth 127mm Length  56mm Width  33mm Depth Weight (with batteries) 113 g 153 g 158 g Temperature range: Storage Operation -25 °C to +70°C (-13 °F to +158 °F)  0 °C to +40 °C  (32 °F to +104 °F) -25 °C to +70°C  (-13 °F to +158 °F)  -10 °C to +50 °C  (14 °F to +122 °F) Calibration cycle Not applicable Not applicable Tilt and compass Maximum altitude 3000 m 3000 m 3000 m Maximum relative humidity 85% at 20 °F to 120°F  (-7 °C to 50 °C) 85% at 20 °F to 120°F  (-7 °C to 50 °C) 85% at 20 °F to 120°F  (-7 °C to 50 °C) Safety IEC Standard No. 61010-1:2001  EN60825-1:2007 (Class II) EMC EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010 [1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C.  [2] Applies for 10 to 500 % target reflectivity, high background illumination, -10 °C to +50 °C. [3] Tolerances apply from 0.05 m to 10 m with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. [4] Applies for 100 % target reflectivity, background illumination between 10'000 lux and 30'000 lux. [5] After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.